Description
Smart BMS CL 12/100
The Smart BMS CL 12/100 is a battery management system for smart lithium iron phosphate (LiFePO4) batteries from Victron. It has been specially designed for 12V systems with a 12V alternator.
The BMS CL 12/100 monitors and protects each individual cell of the battery (or battery bank) and disconnects the alternator, charging sources or DC loads in the event of low battery voltage, high battery voltage or of overheating.
Dedicated alternator input provides current limiting and one-way traffic from the alternator to the battery, so any size alternator (and starter battery) can be safely connected to the Smart Lithium battery or the batteries.
The BMS is also equipped with a remote on-off connector, to turn off the BMS (and the system) via a remote switch, and a pre-alarm contact, to give a warning signal before the BMS does not disconnect the batteries from the system.
Delivery
Refrigerators, freezers, batteries, solar panels, solar kits, inverters, water heaters, air conditioners and portable power stations are excluded from free shipping ($250 and up) and from the $20 flat rate.
In Quebec: $100 flat rate per order, calculated automatically at checkout.
Outside Quebec: shipping costs vary by destination and no rate is shown at checkout. Use the "Request a Quote" button above or call us at (450) 469-2999. We confirm the exact cost with you before any payment.
If your order contains items from more than one category, shipping charges are added together at checkout.
BACK
Products are covered by the manufacturer's warranty. No returns are accepted after shipping — call us at (450) 469-2999 before ordering if you have any doubt about the model.
Smart BMS CL 12/100
The Smart BMS CL 12/100 is a battery management system for smart lithium iron phosphate (LiFePO4) batteries from Victron. It has been specially designed for 12V systems with a 12V alternator.
The BMS CL 12/100 monitors and protects each individual cell of the battery (or battery bank) and disconnects the alternator, charging sources or DC loads in the event of low battery voltage, high battery voltage or of overheating.
Dedicated alternator input provides current limiting and one-way traffic from the alternator to the battery, so any size alternator (and starter battery) can be safely connected to the Smart Lithium battery or the batteries.
The BMS is also equipped with a remote on-off connector, to turn off the BMS (and the system) via a remote switch, and a pre-alarm contact, to give a warning signal before the BMS does not disconnect the batteries from the system.