Description
Victron Shunt 1000A/50mV. A shunt is added to a system to measure current flow. This is needed for system monitoring or to calculate the battery state of charge.
A shunt is a resistive element. When current passes through it a small voltage drop will occur over the shunt. If the current is small the voltage will be low, and if the current is large the voltage will be higher. If the current flow reverses, the voltage drop will change polarity. The voltage of the shunt is an indication of the amount of current and the direction of the current. This information can be used to find out how much current runs into a system or for battery state of charger calculation.
Delivery
Refrigerators, freezers, batteries, solar panels, solar kits, inverters, water heaters, air conditioners and portable power stations are excluded from free shipping ($250 and up) and from the $20 flat rate.
In Quebec: $100 flat rate per order, calculated automatically at checkout.
Outside Quebec: shipping costs vary by destination and no rate is shown at checkout. Use the "Request a Quote" button above or call us at (450) 469-2999. We confirm the exact cost with you before any payment.
If your order contains items from more than one category, shipping charges are added together at checkout.
BACK
Products are covered by the manufacturer's warranty. No returns are accepted after shipping — call us at (450) 469-2999 before ordering if you have any doubt about the model.
Victron Shunt 1000A/50mV. A shunt is added to a system to measure current flow. This is needed for system monitoring or to calculate the battery state of charge.
A shunt is a resistive element. When current passes through it a small voltage drop will occur over the shunt. If the current is small the voltage will be low, and if the current is large the voltage will be higher. If the current flow reverses, the voltage drop will change polarity. The voltage of the shunt is an indication of the amount of current and the direction of the current. This information can be used to find out how much current runs into a system or for battery state of charger calculation.