Description
VDI-32 Galvanic Isolator Isolation Transformers
The galvanic isolator consists internally of two diodes connected in antiparallel. When connected in this way, the diodes pass current in both directions, but only above a certain threshold voltage. The voltage at which the diodes conduct is approximately 1.4 Vdc.
The isolator is installed directly behind your boat's 230V connection. The forward voltage of the galvanic isolator is greater than the potential difference between the metals. Therefore, this voltage does not allow conduction and the galvanic isolator therefore prevents any electrolytic current. However, if there is an error (higher) voltage in the AC circuit, the diodes will pass current and the RCD will interrupt the circuit.
Delivery
Refrigerators, freezers, batteries, solar panels, solar kits, inverters, water heaters, air conditioners and portable power stations are excluded from free shipping ($250 and up) and from the $20 flat rate.
In Quebec: $100 flat rate per order, calculated automatically at checkout.
Outside Quebec: shipping costs vary by destination and no rate is shown at checkout. Use the "Request a Quote" button above or call us at (450) 469-2999. We confirm the exact cost with you before any payment.
If your order contains items from more than one category, shipping charges are added together at checkout.
BACK
Products are covered by the manufacturer's warranty. No returns are accepted after shipping — call us at (450) 469-2999 before ordering if you have any doubt about the model.
VDI-32 Galvanic Isolator Isolation Transformers
The galvanic isolator consists internally of two diodes connected in antiparallel. When connected in this way, the diodes pass current in both directions, but only above a certain threshold voltage. The voltage at which the diodes conduct is approximately 1.4 Vdc.
The isolator is installed directly behind your boat's 230V connection. The forward voltage of the galvanic isolator is greater than the potential difference between the metals. Therefore, this voltage does not allow conduction and the galvanic isolator therefore prevents any electrolytic current. However, if there is an error (higher) voltage in the AC circuit, the diodes will pass current and the RCD will interrupt the circuit.